Open editing mode in 3D Showcase to easily measure an object or find a room’s dimensions.
Measurements are accurate to within 1%. Learn more.
Measurements ARE NOT visible in 3D Showcase. Measurements are only visible in Edit mode and in Snapshots of Dollhouse/Floorplan where you enabled Assets.
Performance may be limited if you have 100 or more measurements in your space.
Measure an Object
To Measure objects you'll want to go to be in Inside View within Edit mode.
Select the ruler icon from the side toolbar. A menu will pop out. Select "Add"
Move the cursor and the placement sphere will move along the surface. The placement sphere shows the underlying geometry rather than the panoramic imagery. If the sphere is black, that means there is no underlying geometry and you will not get a good measurement. Click where you want to start measuring.
Next click the end of the measurement point. Your measurement will appear on the side.
If you click on a surface again it will start a new measurement. To stop creating new measurements click the escape key.
If you would like to measure floor to ceiling or from one wall to another you can do so in Inside View by simply double clicking on the floor/wall and the measurement will shoot over to the ceiling/other wall.
Find Room Dimensions
To Measure rooms go to Floor Plan View in Edit mode.
Select the ruler icon from the side toolbar. A menu will pop out. Select "Add".
Click on one side of the room and then click again across the room. The system will attempt to keep the measurement perpendicular to the walls to help with accuracy.
If you click on a wall again you will start a new measurement. To stop creating new measurements click the escape key.
To manage Measurements click on the ruler icon and the list of measurements will pop out separated by floor.
In Floor Plan view you will only see measurements taken in floor plan view. They will have a floor plan icon in the list.
In Inside and Dollhouse view you'll be able to view the measurements taken in Inside or Dollhouse view. They will have a Dollhouse icon in the list.
To name a measurement you can click on the measurement in the list. It will bring you to the measurement and let you type a name. Click on the three dots in order to hide or delete the measurement.