The Matterport camera arrives in a custom-made, foam-lined box, along with the quickstart guide and a power supply.
Hardware Specifications
Matterport Pro 3D Camera MC200
| Physical | |
| Size | 9.0″ height / 10.25″ width / 4.38″ depth (229 x 260 x 111 mm) |
| Weight | 6.5 lb (3.0 kg) |
| Operating Temperature | 50º to 90º F (10 to 32° C) |
| Storage Temperature | 32º to 104º F (0 to 40° C) |
| Color | Black |
| Electrical | |
| Input Voltage |
15V DC |
| Battery Capacity | About 8 hours (continuous use) via 2 packs. 4900mAh-5100mAh, at 14.4V, which comes out to 70.56Wh - 73.44Wh per pack. |
| Charge Time | 4.5 hours |
| Connections | |
| Wireless Connections | Wi-Fi 802.11 b/g/n 2.4GHz (client or AP) Bluetooth 4.0 (not used) |
| Mounting Connection | Female 3/8"-16 and, in B-series and later, Arca-Swiss-type QR plate, permanently installed. The quick release adapter plate is permanently attached to the bottom of the camera and cannot be removed. |
| Capture Performance | |
| Camera Warmup Time | 57 seconds |
| Capture Resolution | 2K square per skybox face |
| Capture Time Per Scan | 20 seconds |
| Transfer Time from Camera to iPad | 16 seconds |
| Aligning/Processing Time on iPad | About 10 seconds. Maximum of 25 seconds before triggering an alignment error. |
| Number of Exposures per HDR frame | 7 exposures at normal dynamic range |
| Depth Resolution | 10 points per degree (3600 points at equator, 1800 points at meridian, about 4 million points per pano) |
| Output Pano Pixels | 33.6 MP, equirectuangular. For internal processing only. |
. Only use charger included with camera.