Matterport Pro2 3D Camera Specifications

Compare to the Matterport Pro 3D Camera specifications

The Matterport camera arrives in a custom-made, foam-lined box, along with the quickstart guide and a power supply.

 pro2-angle-view.png 

Hardware Specifications

Matterport Pro2 3D Camera MC250

Physical
Size 9.0″ width / 10.25″ height / 4.33″ depth (230 x 260 x 110 mm) 
Weight 7.6 lb (3.5 kg) 
Operating Temperature 50º to 90º F (10 to 32° C)
Storage Temperature 32º to 104º F (0 to 40° C)
Color Black 
OLED Display Screen Included 
Electrical
Input Voltage

15V DC  Only use charger included with camera. Learn more.

Battery Capacity About 8 hours (continuous use) via 2 packs at 77 Whr each, permanently installed. 8 cells per battery, 9.6 Whr per cell. 
Charge Time 4.5 hours 
Connections
Wireless Connections WiFi to transfer data from camera to iPad through the Capture app. WiFi 802.11 n/ac 5 GHz. The available modes may be restricted in your country.
Mounting Connection Female 3/8"-16 Arca-Swiss-type QR plate, permanently installed. The quick release adapter plate is permanently installed to the bottom of the camera and cannot be removed. 
GPS Included
Lens 4K Full Glass
Capture Performance
Camera Warmup Time 57 seconds
Capture Resolution 4K square per skybox face
Capture Time per Scan 31 seconds
Transfer Time from Camera to iPad 3 seconds
Aligning/Processing Time on iPad Maximum of 25 seconds before triggering an alignment error
Number of Exposures per HDR Frame 5 exposures
Depth Resolution 10 points per degree (3600 points at equator, 1800 points at meridian, about 4 million points per pano)
Output Pano Pixels 134.2 MP, Equirectangular
System Performance
Maximum Snapshot Download Resolution

8092 x 4552 pixels @ 70% zoom level (36 MP)

Other resolutions:

  • 5664 x 3186 @ 100% (18 MP)
  • 2832 x 1593 @ 200% (4 MP)
  • 1888 x 1062 @ 300% (2 MP)
Average Load Time for 3D Showcase

3.5 seconds over WiFi (desktop), 4.5 seconds over LTE (mobile). Similar to Matterport Pro 3D Camera.

Load times are approximate. Real load times will vary depending on your internet connection, the size of the Space, and other factors.

Visual Experience inside 3D Showcase More detailed 2D panoramas when compared to the Matterport Pro 3D Camera. Enhanced zooming up to 300%.
Transition Time between Panos in 3D Showcase Similar to Matterport Pro 3D Camera
White Balancing Automatic full-model
3D Data Registration Automatic
Standards Compliance
European Union, conforms to the following standards EN 301 893 5 GHz high performance RLAN. Harmonized EN covering essential requirements of article 3.2 of R&TTE directive
 EN 301 489-1 Radio equipment EMC (electro magnetic compatibility). Harmonized standard covering the essential requirements of article 6 of Directive 2014/30/EU
 EN 301 489-17 Radio equipment EMC (electro magnetic compatibility), part 17: specific conditions for broadband data transmission Systems. Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU 
EN 55032 Electromagnetic Compatibility, Class B Emissions
 EN 55024 Electromagnetic Compatibility, Immunity
EN 60950-1 Information Technology Equipment, Safety
European Union, follows the provisions of the following directives 2014/30/EU  EMC Directive
2014/35/EU Product Safety Directive
2014/53/EU Radio Equipment Directive
2012/19/EU Directive on Waste Electrical and Electronic Equipment
 2006/66/EC  Batteries and Accumulators Waste Batteries Directive
 2011/65/EU Restriction of Hazardous Substances (RoHS) Directive 
Australian Directives EN 301 893 5 GHz high performance RLAN. Harmonized EN covering essential requirements of article 3.2 of R&TTE directive
EN 301 489-1 Radio equipment EMC (electro magnetic compatibility). Harmonized standard covering the essential requirements of article 6 of Directive 2014/30/EU
EN 301 489-17 Radio equipment EMC (electro magnetic compatibility), part 17: specific conditions for broadband data transmission Systems. Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
EN 55032 Electromagnetic Compatibility, Class B Emissions
AS/NZS 4268:2017 Radio Equipment and Systems - Short Range Devices - Limits and Methods of Measurement
 AS/NZS 60950-1  Information Technology Equipment, Safety
Japanese Standards この装置は、クラスB情報技術装置です。この装置は、家庭環境で使用することを目的とし ていますが、この装置がラジオやテレビジョン受信機に近接して使用されると、受信障害を引き起こすことがあります。取扱説明書に従って正しい取り扱いをして下さい。  
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference; and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult Matterport or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by Matterport could void the user's authority to operate the equipment.
Innovation, Science and Economic Development (ISED) Canada Compliance This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
For more information please read the Essential User Guide for Pro2 3D Camera.
Have more questions? Submit a request